Home > Decoiler Straightener Feeder >

Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller

Product Categories

Decoiler Straightener Feeder [223]
Coil Feeder Straightener [92]
Decoiler And Straightener [89]
Nc Servo Roll Feeder [79]
High Speed Feeder [50]
NC Leveler Feeder [47]
Metal Sheet Straightening Machine [52]
Decoiling And Straightening Machine [47]
Strip Straightener Machine [46]
Steel Plate Straightening Machine [42]
Steel Coil Uncoiler [70]
Sheet Metal Decoiler [70]

GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Now

Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller

Name: Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller
Brand: RUIHUI
Price: 1 USD

Best Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller wholesale

Brand Name : RUIHUI

Certification : CE Certificate

Place of Origin : Guangdong, China (Mainland)

MOQ : 1 Set

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 30 Sets Per Month

Delivery Time : 30 work days

Packaging Details : Wooden Box or Vacuum Packing

Condition : New

Type : Straightener Feeder & Uncoiler

Use : Sheet

Voltage : 380V/Customized

Power(W) : 6KW

Dimension(L*W*H) : 1400*1850*2070

Weight : 2.5T

Warranty : 1 Year

After-sales Service Provided : Field installation, commissioning and training, Engineers available to service machinery overseas

Product Name : NC Servo Straightener Feeder

Material Width : 50-300mm

Material Thickness : 0.2-3.0mm

Coil Weight : 2000kg

Work Roll Number : Upper 4 /down 3

Feed Roll Number : 1 set

Material : Metal

Power : 3 Phase 220V/380V/50HZ

Contact Now

Metal Parts Stamping Die, Nc Feeder, Punch Feed Roller, Automatic feeder equipment, Automatic feeding robot

www.ruihui.net

The amount and direction of feeding error are not necessarily the cause of the failure:
1. There is metal or other foreign matter entering the feeding roller or gear.
2. There is interference between the feeding cam, the relaxing cam and the timing of the punching action.
3. When the material is fed into the feeder, the roller will slip.
Corresponding troubleshooting methods:
1. Remove foreign matter from the rollers or gears.
2. Adjust the micro switch (L, S).
3. Increase the pressure of the roller.
2 times the amount of feed failure occurred:
1, often happens.
2. The punching action is once, and the feeding action is twice.
Corresponding troubleshooting methods:
1. Check if the micro switch and wire terminal of the NC feeder start to have noise interference; if there is noise interference, replace the wire between the micro switch and the terminal block.
2. Reset or replace the micro switch (L, S)
The reason why the roller does not relax is:
1. The positioning guide pin in the mold is not effective.
2. The time for the feeder roller to relax is not correct.
3. There is an offset phenomenon in the feeding direction.
4, the roller does not go smoothly.
5. The micro-switch SW signal of the punching cam is not normal.
Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller
Specification:

Model	MAC2-400	MAC2-500	MAC2-600		MAC2-800
Stock Width(mm)	50-400	50-500	50-600		50-800
Stock Thickness(mm)	0.3~3.2	0.3-3.2	0.3-3.2		-3.2
Max.Coil Weight(kg)	3000	3000	3000	5000	5000	7000
Max.Coil O.D.(mm)	1200	1200	1200
Coil I.D.(mm)	8	8	508		508
Feed Length(mm)	~500*	~500*	~500*		~500*
Max. Line Speed(m/min)	16-24	16-24	16-24		16-24
Work Roll Number(pieces)	upper 6 lower 5	upper 6 lower 5	upper 6 lower 5		upper 6 lower 5
Feed Roll Number(set)	1	1	1		1
Main Motor(kw)	AC2.9	AC2.9	AC4.4		AC4.4
Mandrel Expansion	hydraulic	hydraulic	hydraulic		hydraulic
Reel Motor(kw)	1.5	1.5	1.5	2.2	2.2	3.7
Power(V)	3 Phase 220V/380V/50HZ
Operating Air(Mpa)	0.49	0.49	0.49		0.49

Straigtening performance:

tock Thicknees (mm)	Stock Width (mm)
0.3	400	500	600	800
0.4
0.6
0.8
1.0
1.2
1.4
1.6			470	470
1.8			400	400
2.0			360	360
2.3	300	300	300	300
2.5	230	230	230	230
2.8	150	150	150	150
3.2	110	110	110	110

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Product Tags:

coil feeder straightener

coil handling equipment

Metal Parts Stamping Die Nc Decoiler Straightener Feeder Punch Feed Roller Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!